This flue pipe and accessory set will fit Little Burners: Warehouse Lenny Burner.
Internal Cover Plate
150mm x 75mm (x2), 70mm hole diamater for flue pipe to sit through. 8 screw holes (4.5 diameter), black screws included.
0.8mm mild steel - black.
Rain Cap
6x Nuts and bolts included.
Operating temperature - Rubber Silicone Boot
Safe operating 200° degrees - Max 225 ° (Short period of time).
A flashing kit should be installed with a minimum distance of 110-120cm from the stove to allow sufficient cooling.
Always wear gloves when installing the kit. May have sharp edges on the inner plate.
We recommend cutting the product 20-30% smaller than the pipe to ensure a perfectly tight seal
We do not accept any liability for loss or damage incurred by the use of the flashing kit howsoever caused.
Please note that fittings do not provide a watertight fit. High heat seals, tapes, and lubricants should be used when fitting to prevent water from entering.
