3" Single Wall Flue Kits
3" Single Wall Flue Kits
No reviews
Preço normal
89.500 Ft
Preço normal
Preço de saldo
89.500 Ft
Preço unitário
/
por
76mm Single Wall Stove Flue Pipes
We do not accept any liability for loss or damage incurred by the use of the flashing kit howsoever caused.
This flue pipe and accessory set will fit Little Burners: Little Lenny, Lenny and Florence. **Not Burt or Betty**
Internal Cover Plate
- 250mm x 125mm (x2), 80mm hole diamater for flue pipe to sit through. 8 screw holes (4.5 diameter), black screws included.
- 0.8mm mild steel - powder coated black.
Rain Cap
- 6x Nuts and bolts included.
Operating temperature - Rubber Silicone Boot
- Safe operating 200° degrees - Max 225 ° (Short period of time).
- A flashing kit should be installed with a minimum distance of 110-120cm from the stove to allow sufficient cooling.
- Always wear gloves when installing the kit. May have sharp edges on the inner plate.
- We recommend cutting the product 20-30% smaller than the pipe to ensure a perfectly tight seal
This flue kit sits on the exterior of the flue stub on the burner.
We do not accept any liability for loss or damage incurred by the use of the flashing kit howsoever caused.
Please note that fittings do not provide a watertight fit. High heat seals, tapes, and lubricants should be used when fitting to prevent water from entering.
Materials
Materials
Steel
Shipping & Returns
Shipping & Returns
In case you are not satisfied with any product, or wish to cancel your order after it has been dispatched, we offer a money back guarantee for products returned to us:
– in their original packaging;
– in a brand-new, unused, salable condition;
– within 14 days of purchase.
Return delivery costs must be dealt with by the customer and we request customers contact us to confirm the address to which you need to return items. Used goods cannot be returned.
Little Burners can advise on courier / postal returns.
*Free Shipping**
Share
-
Free Shipping